#!/bin/bash

# Slackware build script for BOSL2

# Copyright 2023 Fernando Lopez Jr. <fernando.lopezjr@gmail.com>
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


cd $(dirname $0) ; CWD=$(pwd)

PRGNAM=BOSL2
COMVER=1c8e5efa96e3e9231c65c52ed3142b6da0cb484e
VERSION=${VERSION:-2023.05.19.1c8e5ef}
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}
PKGTYPE=${PKGTYPE:-tgz}
ARCH=noarch

if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
  exit 0
fi

TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

set -e

SRCNAM=BOSL2

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $SRCNAM-$COMVER
tar xvf $CWD/$SRCNAM-$COMVER.tar.gz
cd $SRCNAM-$COMVER

chown -R root:root .
find -L . \
 \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
 -exec chmod 755 {} \+ -o \
 \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
 -exec chmod 644 {} \+

mkdir -p $PKG/usr/share/openscad/libraries/BOSL2/tests

install -m775 tests/polyhedra.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_affine.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_attachments.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_comparisons.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_coords.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_cubetruss.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_distributors.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_drawing.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_edges.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_fnliterals.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_geometry.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_linalg.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_linear_bearings.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_lists.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_masks2d.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_math.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_mutators.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_paths.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_regions.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_rounding.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_screw_drive.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_shapes2d.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_shapes3d.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_skin.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_strings.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_structs.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_transforms.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_trigonometry.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_utility.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_vectors.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_version.scad $PKG/usr/share/openscad/libraries/BOSL2/tests
install -m775 tests/test_vnf.scad $PKG/usr/share/openscad/libraries/BOSL2/tests

mkdir -p $PKG/usr/share/openscad/libraries/BOSL2/examples

install -m775 examples/BOSL2logo.scad $PKG/usr/share/openscad/libraries/BOSL2/examples
install -m775 examples/attachments.scad $PKG/usr/share/openscad/libraries/BOSL2/examples
install -m775 examples/boolean_geometry.scad $PKG/usr/share/openscad/libraries/BOSL2/examples
install -m775 examples/fractal_tree.scad $PKG/usr/share/openscad/libraries/BOSL2/examples
install -m775 examples/lsystems.scad $PKG/usr/share/openscad/libraries/BOSL2/examples
install -m775 examples/orientations.scad $PKG/usr/share/openscad/libraries/BOSL2/examples
install -m775 examples/spherical_patch.scad $PKG/usr/share/openscad/libraries/BOSL2/examples

install -m775 affine.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 attachments.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 ball_bearings.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 beziers.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 bosl1compat.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 bottlecaps.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 builtins.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 color.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 comparisons.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 constants.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 coords.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 cubetruss.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 distributors.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 drawing.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 fnliterals.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 gears.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 geometry.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 hinges.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 joiners.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 linalg.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 linear_bearings.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 lists.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 masks2d.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 masks3d.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 math.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 metric_screws.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 modular_hose.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 mutators.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 nema_steppers.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 partitions.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 paths.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 polyhedra.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 regions.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 rounding.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 screw_drive.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 screws.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 shapes2d.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 shapes3d.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 skin.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 sliders.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 std.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 strings.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 structs.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 threading.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 transforms.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 trigonometry.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 tripod_mounts.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 turtle3d.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 utility.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 vectors.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 version.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 vnf.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 walls.scad $PKG/usr/share/openscad/libraries/BOSL2/
install -m775 wiring.scad $PKG/usr/share/openscad/libraries/BOSL2/

mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a CONTRIBUTING.md LICENSE README.md WRITING_DOCS.md $PKG/usr/doc/$PRGNAM-$VERSION
cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE